Raw Materials
- High-purity raw material in the form of copper is used. It is always in excess of 99.9% pure in content. This provides optimum performance both electrically and thermally.
- Sometimes, amounts of an alloying element such as phosphorus, tin, or silver are added to enhance certain aspects such as strength or hardness.
Production process
- Extrusion: The copper billet is initially heated to an appropriate temperature (usually between 700 to 850°C) to soften to an appropriate consistency. It is then forced through an appropriately shaped die by a hydraulic press. This can produce continuous lengths of lengths of specially shaped extrusions.
- Cold Drawing (Optional): This can be done subsequent to extruding to obtain improved final dimensional tolerance and final surface condition. It is drawn through dies in an atmosphere controlled to maintain room temperature in order to reduce its area in section and to acquire strength.
- Heat Treatment: Internal stress is erased and material microstructure is put in an ideal condition by undergoing heat treatment in annealing process. Heat is used to pre-warm the extrusions to an optimum point before gradually coming down to cold.
Quality Assurance
- Dimensional Inspection: Calibration tools including calipers, micrometers, and Coordinate Measuring Machines (CMM) inspect to ensure sizes needed in the extrusions.
- Chemical Testing: Analytical spectrometry is employed to analyze the content in chemicals in copper in order to validate that the proportion used in an alloy is in accordance with requirements.
- Mechanical Testing: Tension testing, hardness testing, and bend testing is conducted to check the mechanical strength of the extrusions to check that these can withstand stress in vehicles.
Application in Automotives
- Electrical Systems: Utilized in bus bars, connectors, and wire harnesses where their conductance is advantageous to transmit efficiently.
- Heat transfer: Heat transfer has been realised through specially formed copper extrusions in systems used to cool through improved conductance to transfer efficiently.
- Mechanical Parts: Utilized sometimes as structural or dynamic parts where formability is needed in addition to resisting corrosion.
Hot Tags: special-shaped copper extrusions for automotives, China special-shaped copper extrusions for automotives manufacturers, suppliers, factory, Special shaped Copper Extrusions for Marines, Special shaped Copper Extrusions for New Energy, Special shaped Copper Extrusions for Power Equipment, Special shaped Copper Extrusions for Communication Devices, Special shaped Copper Extrusions for Aerospace Industry, Special shaped Copper Extrusions for Automotives






